{"product_id":"maxx-cnc-aluminum-hopup-chamber-me-pro-with-led","title":"Maxx CNC Aluminum Hopup Chamber ME - PRO with LED","description":"\u003ch3 class=\"product-property-title\"\u003eProduct Description\u003c\/h3\u003e\n\u003cdiv id=\"collapse-description\" class=\"desc-collapse showup\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*THIS UNIT IS NOT COMPATIBLE WITH AEGS THAT HAVE ELECTRONIC TRIGGERS LIKE ARES, G\u0026amp;G, GATE, ASCU ETC. IT WILL WORK FINE WITH MICROMOSFETS OR BASIC AEG.\u003cbr\u003e\u003cbr\u003eCNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4\/M16 Standard AEG series. The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot. Its hopup chamber unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs. Also its equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore. More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e***The Dual UV LED Boards and Module set and Single UV LED Board w\/ Clear Cover and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)\u003c\/li\u003e\n\u003cli\u003e***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor\/HPA firing when the magazine is empty. (Sold separately)\u003c\/li\u003e\n\u003cli\u003e***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!\u003cbr\u003e\u003cbr\u003eIncludes:\u003cbr\u003e1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit\u003cbr\u003e1 x Dual UV LED Boards and Module set\u003cbr\u003e2 x Strong Clear Vinyl Cover set\u003cbr\u003e1 x CNC Aluminum Standard-Hop Arm\u003cbr\u003e1 x CNC Aluminum R-Hop Arm\u003cbr\u003e1 x Silicone Rubber Standard-Hop Nub Damper\u003cbr\u003e1 x Silicone Rubber R-Hop Nub Damper\u003cbr\u003e1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub\u003cbr\u003e1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub\u003cbr\u003e1 x CNC Brass Threaded Slot Pin\u003cbr\u003e1 x CNC Delrin Locking C-Clip\u003cbr\u003e1 x CNC Barrel Brass Spacer\u003cbr\u003e1 x Brass Spacer Holder Oring\u003cbr\u003e3 x Steel Compression Spring\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003eOverall Length: 51mm\u003cbr\u003eOverall Height: 37.75mm\u003cbr\u003eHub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm\u003cbr\u003eHub Outer Diameter (to fit into Outer Barrel): min 12mm\u003cbr\u003eHub Inner Diameter (to fit Nozzle): max 8.3mm\u003cbr\u003eFeeder Outer Diameter (to fit magazine): min 9.25mm\u003cbr\u003eFeeder Length (to fit magazine): max 6.25mm\u003cbr\u003eMaterial: Aluminum 6061\u003cbr\u003e\u003cbr\u003eFeatures\u003c\/li\u003e\n\u003cli\u003eMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability\u003c\/li\u003e\n\u003cli\u003eImproved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4\/M16 Standard AEG series\u003c\/li\u003e\n\u003cli\u003ePrecision rotary dial design for fine hopup adjustments\u003c\/li\u003e\n\u003cli\u003eRe-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot\u003c\/li\u003e\n\u003cli\u003eRemovable Brass Threaded Slot Pin for setup and maintenance\u003c\/li\u003e\n\u003cli\u003eAccepted the nozzle length from 21.00mm to 21.25mm\u003c\/li\u003e\n\u003cli\u003eFully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs\u003c\/li\u003e\n\u003cli\u003eEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting\u003c\/li\u003e\n\u003cli\u003eEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight\u003c\/li\u003e\n\u003cli\u003eCompatible with any V2 gear boxes with 11mm or 11.5mm bore\u003c\/li\u003e\n\u003cli\u003eSpecially designed with BB Latching System to prevent dropping BBs after removing the magazine\u003c\/li\u003e\n\u003cli\u003eManually opened to release BBs from inside hopup chamber by hand\u003c\/li\u003e\n\u003cli\u003eThe Dual UV LED Boards and Module set and Single UV LED Board w\/ Clear Cover and Module set to glow BBs in the dark ready!\u003c\/li\u003e\n\u003cli\u003eIncluded the Dual UV LED Boards and Module set to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)\u003c\/li\u003e\n\u003cli\u003eThe Empty Magazine Detection Sensor to stop Motor\/HPA firing ready!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x \u003ca title=\"Go to Dual UV LED Boards and Module set\" href=\"https:\/\/www.maxxmodel.com\/dual-uv-led-boards-and-module-set-for-maxx-me-mi-hopup-series.html\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eDual UV LED Boards and Module set\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e2 x Strong Clear Vinyl Cover set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Aluminum Standard-Hop Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Aluminum R-Hop Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x Silicone Rubber Standard-Hop Nub Damper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x Silicone Rubber R-Hop Nub Damper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Brass Threaded Slot Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Delrin Locking C-Clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x CNC Barrel Brass Spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x Brass Spacer Holder Oring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003e3 x Steel Compression Spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Length: 51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eOverall Height: 37.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eHub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eHub Outer Diameter (to fit into Outer Barrel): min 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eHub Inner Diameter (to fit Nozzle): max 8.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eFeeder Outer Diameter (to fit magazine): min 9.25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eFeeder Length (to fit magazine): max 6.25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eMaterial: Aluminum 6061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eImproved accuracy and ensure consistent air seal for \u003ca title=\"Go to Tokyo Marui\" href=\"https:\/\/www.tokyo-marui.co.jp\/index2.html\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eTokyo Marui\u003c\/a\u003e (include \u003ca title=\"Go to KRYTAC\" href=\"https:\/\/www.krytac.com\/\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eKRYTAC\u003c\/a\u003e and \u003ca title=\"Go to KWA\" href=\"https:\/\/store.kwausa.com\/\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eKWA\u003c\/a\u003e) M4\/M16 Standard AEG series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision rotary dial design for fine hopup adjustments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eRe-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eRemovable Brass Threaded Slot Pin for setup and maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eAccepted the nozzle length from 21.00mm to 21.25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eFully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible with any V2 gear boxes with 11mm or 11.5mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eSpecially designed with BB Catching System to prevent dropping BBs after removing the magazine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eIncluded the \u003ca title=\"Go to Dual UV LED Boards and Module set\" href=\"https:\/\/www.maxxmodel.com\/dual-uv-led-boards-and-module-set-for-maxx-me-mi-hopup-series.html\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eDual UV LED Boards and Module set\u003c\/a\u003e to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eThe Empty Magazine Detection Sensor to stop Motor\/HPA firing ready!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eN\/A grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible with most \u003ca title=\"Go to Tokyo Marui\" href=\"https:\/\/www.tokyo-marui.co.jp\/index2.html\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eTokyo Marui\u003c\/a\u003e (include \u003ca title=\"Go to KRYTAC\" href=\"https:\/\/www.krytac.com\/\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eKRYTAC\u003c\/a\u003e and \u003ca title=\"Go to KWA\" href=\"https:\/\/store.kwausa.com\/\" target=\"_blank\" rel=\"noopener\" data-gener8=\"tracked\"\u003eKWA\u003c\/a\u003e) M4\/M16 standard AEG version 2 gear box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" width=\"100%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" bgcolor=\"#cccccc\" width=\"14\"\u003e \u003c\/td\u003e\n\u003ctd bgcolor=\"#cccccc\"\u003e\u003cstrong\u003eRequires\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eWearing eye protection is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eUse proper tools for disassembly and reassembly the gear box with great care due to spring tension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"14\"\u003e\u003cimg src=\"https:\/\/www.maxxmodel.com\/image\/catalog\/product_right_arrow.png\" width=\"14\" height=\"14\" border=\"0\"\u003e\u003c\/td\u003e\n\u003ctd\u003eBearing lubricant oil\/grease is recommended for smooth operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Maxx","offers":[{"title":"Default Title","offer_id":58627949756800,"sku":"MX-HOP005PRL","price":65.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7600\/2688\/files\/mx-hop005prl_1.jpg?v=1785755365","url":"https:\/\/red1airsoft.com\/products\/maxx-cnc-aluminum-hopup-chamber-me-pro-with-led","provider":"Red 1 Airsoft","version":"1.0","type":"link"}